Micro Cement
PMAC now offers a complete micro cement installation service across Ireland, bringing 27 years of surface expertise to one of the most specified decorative finishes in contemporary architecture and interior design. Seamless, ultra-thin and endlessly adaptable, micro cement transforms floors, walls and architectural features with a continuous mineral finish that no tile or traditional floor covering can replicate.
We supply and install three Topcret micro cement systems, each engineered for a specific performance requirement. Whether you’re specifying a high-traffic commercial floor, a seamless wall finish for a hospitality interior, or a natural clay surface for a wellness or residential project, PMAC has the product and the expertise to deliver it to specification standard.
All systems are water-based, VOC-free and certified under LEED, BREEAM and WELL
Service
Polished concrete floors
A STUNNING ARCHITECTURAL FLOOR WITH A LIFESPAN AS LONG AS YOUR BUILDING
BAXAB® ECO
The Most Advanced Micro Cement for High-Traffic Floors
BAXAB® ECO is the flagship micro cement system for commercial floors. Engineered to the highest performance standard in the Topcret range, it has a surface hardness of 120 N/mm², three times stronger than conventional micro cements, making it the right choice for the most demanding commercial environments.
Hotel lobbies, retail floors, restaurant interiors, office receptions and healthcare facilities, BAXAB® ECO delivers the seamless mineral aesthetic that architects and designers are specifying, without compromising on durability.
At just 2–3mm thick, it installs directly over existing substrates including cement, metal, plastic, tiles and ceramic, with no demolition, no change in floor level and no disruption to the build programme.
PMAC’s trained operatives apply BAXAB® ECO by hand, using the layered system that gives the finish its depth and character.
Key Specification Points
Surface hardness of 120 N/mm², three times stronger than conventional micro cement
Impact resistance greater than 14.7 N/m with first cracks only observed at a fall height of 1,500mm
Bending resistance of 1.3 kN/mm², providing exceptional flexibility under load
Certified at Exemplary Level under LEED, BREEAM International and BREEAM NOR
Bending resistance of 1.3 kN/mm², providing exceptional flexibility under load
Open to foot traffic 24 hours after installation and fully waterproof within 72 hours
Installs over cement, metal, plastic, tiles and ceramic with no demolition required
Key Specification Points
Surface hardness of 120 N/mm², three times stronger than conventional micro cement
Impact resistance greater than 14.7 N/m with first cracks only observed at a fall height of 1,500mm
Bending resistance of 1.3 kN/mm², providing exceptional flexibility under load
Certified at Exemplary Level under LEED, BREEAM International and BREEAM NOR
Bending resistance of 1.3 kN/mm², providing exceptional flexibility under load
Open to foot traffic 24 hours after installation and fully waterproof within 72 hours
Installs over cement, metal, plastic, tiles and ceramic with no demolition required
Ideal for Hotel lobbies and public corridors, retail stores, restaurant and hospitality interiors, office receptions, healthcare and public sector buildings.
Certification BAXAB® ECO has achieved the highest rankings under LEED, BREEAM International and BREEAM NOR at Exemplary Level, and holds the French VOC A+ rating, WELL certification, and passes CDPH, M1 and Belgian regulatory standards.
Whether you are an architect, designer or homeowner considering BAXAB® ECO for your next project, we would love to hear about it. We are always happy to offer advice, visit your site or talk through your ideas. You are also welcome to visit our showroom. Contact us here: https://pmac.ie/contact-pmac/.
ECOCEMENTO®
A Seamless Micro Cement System for Floors, Walls and Architectural Surfaces
EcoCemento® is a high-performance microcement that works throughout the entire interior envelope. Floors, walls, stairwells, bathrooms, shower enclosures and architectural features, one system, applied at just 2 to 3mm thickness, creates a continuous surface language with no grout lines, no joints and no visual interruption.
It is also the most sustainably engineered micro cement available, entirely VOC-free, non-toxic and water-based, certified at Exemplary Level under LEED, BREEAM, and WELL.
It installs directly over almost any existing substrate including cement, metal, plastic, tiles and ceramic, with no demolition and no change in floor level.
Floors are open to foot traffic within 24 hours and the system is fully waterproof within 72 hours, with no additional waterproofing layers required, making it suitable for kitchens, bathrooms and wet rooms.
Available in smooth and rustic textures across a wide specifiable colour palette, EcoCemento® can be tailored to suit any interior concept, from understated natural tones to bold contemporary finishes.
Key Specification Points
- The world’s first VOC-free, non-toxic, water-based micro cement
- Certified at Exemplary Level under LEED, BREEAM International and BREEAM NOR
- Surface hardness of 43 N/mm²
- Impact resistance greater than 14.7 N/m
- Wear resistance of 160 microns
- Slip resistance rating of 27 on unpolished floors, tested to UNE-ENV 12633
- Resistant to strong chemical attacks with no defects after 7 days of contact with olive oil, water, alcohol and coffee
- Totally waterproof with no additional waterproofing layers required
- Installs over cement, metal, plastic, tiles and ceramic with no demolition or floor height change
- Open to foot traffic after 24 hours with full hardness reached at 21 days
- Available in smooth and rustic textures across a wide specifiable colour palette
Key Specification Points
- The world’s first VOC-free, non-toxic, water-based micro cement
- Certified at Exemplary Level under LEED, BREEAM International and BREEAM NOR
- Surface hardness of 43 N/mm²
- Impact resistance greater than 14.7 N/m
- Wear resistance of 160 microns
- Slip resistance rating of 27 on unpolished floors, tested to UNE-ENV 12633
- Resistant to strong chemical attacks with no defects after 7 days of contact with olive oil, water, alcohol and coffee
- Totally waterproof with no additional waterproofing layers required
- Installs over cement, metal, plastic, tiles and ceramic with no demolition or floor height change
- Open to foot traffic after 24 hours with full hardness reached at 21 days
- Available in smooth and rustic textures across a wide specifiable colour palette
Ideal For Feature walls and stairwells, bathroom and wet room surfaces, hotel and restaurant interiors, office and retail fit-outs, kitchen floors and walls, shower enclosures, and design-led residential projects requiring a seamless continuous finish throughout.
Certification EcoCemento® holds the French VOC A+ rating and passes CDPH, M1, Belgian and Italian CAM regulatory standards. It achieves Exemplary Level under BREEAM International and BREEAM NOR, the highest possible classification, and is certified under LEED and WELL.
Whether you are an architect, designer or homeowner considering EcoCemento® for your next project, we would love to hear about it. We are always happy to offer advice, visit your site or talk through your ideas. You are also welcome to visit our showroom. Contact us here: https://pmac.ie/contact-pmac/.
Clay®
Natural Clay, Reinvented for Modern Interiors
Clay® is a premium clay-based wall finish that pairs the tactile warmth of natural materials with the performance and durability that modern interiors demand. Stronger than traditional clay, breathable, VOC-free and waterproof before sealers, it is a finish that works as well in a bathroom as it does in a living room, bedroom or wellness space.
It comes in two technical systems designed for different environments. The Wall system is breathable and vapour permeable, naturally regulating humidity and contributing to healthier indoor air quality, making it ideal for bedrooms, living spaces and any interior where the quality of the environment matters as much as the quality of the finish.
The Hydro+ system makes Clay® fully waterproof before sealers are even applied, making it a genuine specification option for bathrooms, shower enclosures and wet rooms without the need for additional waterproofing products.
Both systems apply over existing substrates with no demolition required, and Clay® stays beautiful with minimal maintenance over time. With three texture grades available, M, L and XL, and a broad palette of contemporary earthy and neutral tones, it gives designers genuine creative flexibility across a wide range of residential, commercial and wellness schemes.
Key Specification Points
- VOC-free, non-toxic and water-based, certified under WELL, BREEAM and EPD International standards
- Stronger and more durable than traditional clay plasters
- Breathable Wall system that naturally regulates humidity, ideal for wellness, bedroom and living spaces
- Hydro+ system is waterproof before sealers, fully suitable for bathrooms and wet rooms
- Three texture grades, M, L and XL, for a range of tactile surface finishes
- Installs over existing substrates with no demolition required
- Easy to maintain with a pH-neutral detergent
- Contemporary earthy and neutral colour palette, fully specifiable to any interior scheme
- Light foot traffic permitted after 24 hours on the Hydro+ system with furniture repositioning after 7 days
Key Specification Points
- VOC-free, non-toxic and water-based, certified under WELL, BREEAM and EPD International standards
- Stronger and more durable than traditional clay plasters
- Breathable Wall system that naturally regulates humidity, ideal for wellness, bedroom and living spaces
- Hydro+ system is waterproof before sealers, fully suitable for bathrooms and wet rooms
- Three texture grades, M, L and XL, for a range of tactile surface finishes
- Installs over existing substrates with no demolition required
- Easy to maintain with a pH-neutral detergent
- Contemporary earthy and neutral colour palette, fully specifiable to any interior scheme
- Light foot traffic permitted after 24 hours on the Hydro+ system with furniture repositioning after 7 days
Ideal For Boutique hotel bedrooms and suites, spa and wellness interiors, bathroom and wet room feature walls, residential living rooms and bedrooms, hospitality and restaurant interiors, biophilic and natural material-led commercial spaces, WELL and BREEAM targeted projects.
Certification Clay® is certified under WELL and BREEAM and holds EPD International certification. It is water-based, solvent-free and entirely VOC-free, contributing to healthier indoor environments and supporting projects targeting the highest sustainability standards.
Whether you are an architect, designer or homeowner considering Clay® for your next project, we would love to hear about it. We are always happy to offer advice, visit your site or talk through your ideas. You are also welcome to visit our showroom. Contact us here: https://pmac.ie/contact-pmac/.