SERVICES
STUNNING HIGHLY POLISHED CONCRETE FLOOR OVERLAYS POURED AND POLISHED TO DELIVER PREMIUM SUSTAINABLE FLOORING SOLUTIONS
Rapid Set TRU® Self Levelling polished concrete systems are a high-quality, innovative, self-levelling designer floor, based on special cement technology. Ideal where time is a constraint, high early strength, durability and low shrinkage setting are desired. TRU® maintains workability for up to 20 minutes and is ready for foot traffic after 2 to 3 hours.
TRU® floors can be polished to a high sheen 24 hours after placement and possess the same qualities of a regular polished concrete floor. Final thickness is from 7 mm to 12 mm; we can go up to 35 mm but we recommend building the floor up with a regular self-levelling screed if this thickness is required.
Additional individual effects can be created and floors can be stained to various colours.
Related Projects
We are absolutely delighted with our new concrete overlay floor. We always wanted a polished concrete floor but didn’t think it was achievable without digging up the whole floor until you suggested your Rapid Set Solution. Your crew came in and poured the floor on the first day and then returned the next to polish it. One year later the floor is still stunning and so easy to maintain. Thank you PMAC, a real professional service.

Service
Polished concrete floors
A STUNNING ARCHITECTURAL FLOOR WITH A LIFESPAN AS LONG AS YOUR BUILDING
Highlights
Fields of application
Rapid Set TRU® Self-Levelling is a multipurpose product that is ideal for commercial and residential use. Attractive and durable for the unique design of retail outlets, restaurants, foyers, museums and all public buildings. Also makes for a very attractive floor in the contemporary home. Qualified for indoors and outdoors as well as in wet areas.
Colour natural or grey
Rapid Set TRU® Self-Levelling can be individually stained and coloured. The final surface colour may vary depending on the processing technique and environmental conditions.
Preparation of sub-floor
Sub floor must be load-bearing and resistant to compression and tension. Must be dry and cleaned from contamination, separation agents or loose debris, bond strength min. 1.5 N/mm2. The demands of DIN 18365 and DIN 18560 refer. Joints in the underground have to be taken over.
TRU® Self-levelling is applied on the prepared and primed sub-base in a final thickness of minimum 7 mm. It is ready for polishing 24 hours after application; surfaces can be polished to a high, dense sheen.
Technical data
Technical Data at +20°C
Working Time 30 mins – Flow Time 15 mins
COMPRESSIVE STRENGTH (ASTM C-109 MOD) | |
---|---|
After 4 hrs | Approx. 20 N/mm2 |
After 1 day | Approx. 34 N/mm2 |
After 28 days | Approx. 45 N/mm2 |
BOND STRENGTH (ASTM C-307) | |
After 7 days | Approx. 1.5 N/mm2 |
After 28 days | Approx. 2.5 N/mm2 |
FLEXIBLE STRENGTH (ASTM C-348) | |
After 24 hours | Approx. 6 N/mm2 |
After 28 days | Approx. 13 N/mm2 |
P Mac is the licensed contractor for Rapid Set TRU® Self-Levelling polished concrete floors in Ireland
Check out the below site and video for more information on the process.
Get updates from this and more of our services
We will process the personal data you have supplied in accordance with our privacy policy.